The TeensyROM+ represents the next generation of TeensyROM hardware (PCB v0.4) and the capabilities that come with it. It runs 100% of the standard TeensyROM feature set from the exact same codebase — nothing is removed or downgraded — and then builds a genuinely new tier of capability on top.
The biggest hardware upgrade in TR+ unlocks several of its most significant new capabilities. The original TR can assert the DMA line to pause the C64's CPU — that's how it pulls off tricks like swapping in banks for very large CRT files — but it never actually takes control of the address/data bus itself.
TR+ adds the extra bus-buffering hardware needed to do the real thing: full bi-directional control of the address bus, data bus, and R/*W line, so it can act as a genuine second bus master. That one addition is what unlocks live KERNAL replacement, a real 512KB REU, and remote read/write of C64 memory — none of which are possible on the original hardware.
A handful of other new hardware additions round out the TR+ feature set.
- TR Host Extensions — write and experiment with your own TeensyROM firmware as a
.TRHextension, installed alongside the core firmware without modifying it- Install or remove an extension right from the TeensyROM menu; firmware updates keep it in place
- The first extension, the Mean Hamster Power Engine (MPE), lets your C64 play games never released for it: NES, Game Boy, Doom, classic point-and-click adventures and more
- Envisioned and implemented by Kelly Fox; MPE by John Swiderski
- Kernal Replacement — load a custom KERNAL ROM image, with no other hardware additions or modification.
- Select any KERNAL image right from the SD/USB file browser (
<Shift-K>); your choice is remembered in EEPROM - Once enabled in Special IO, it takes effect through the normal "Exit to BASIC" (F2) path or when launching a PRG
- Select any KERNAL image right from the SD/USB file browser (
- 512KB REU (RAM Expansion Unit) — a real REU your C64 software can detect and use
- Pre-load an REU image from a binary file on SD/USB (
<Shift-R>for any file, or just select it directly if it has an.reuextension) - While REU is running as the active Special IO, save its current contents with a single button press — never overwrites, each save gets its own auto-numbered filename
- Validated against real hardware compatibility tools (REU-Checker, CMD 1750/1750XL REU Test) included right in the Test+Diags menu
- Pre-load an REU image from a binary file on SD/USB (
- Freezer Cartridge Support — Action Replay, Retro Replay, Final Cartridge III and Super Snapshot V5 emulated natively
- Enter freezer on demand via the new 'Alt' button
- Retro Replay, Super Snapshot V5, and Final Cartridge III 101% can also run with the TR+ REU alongside them (on by default, see Settings): a short press of the Alt button freezes, holding it 700 ms or longer saves the REU image
- Freezer contributions by Paul Harker (LessPaul)
- Remote DMA Memory Access —
WriteC64MemandReadC64Memgive an external app direct, real-time read/write access to C64 memory over Serial or Ethernet- This is the TR+ engine behind c64cast — streaming video, and a lot more, straight through your C64
- Battery-Backed Real-Time Clock — a built-in CR1225 coin-cell holder means TR+ remembers/displays the correct time through power cycles, no soldering required
- Keep BASIC's
TI/TI$variables and any RTC-aware program (like the included Segment/Dot Matrix Clock) accurate from the moment you power on — no Ethernet re-sync needed once it's set - The original TR can get there too, but only via a DIY battery mod.
- Keep BASIC's
- External Reset Detect — press an external reset (C64U button, User port, WOPR, or any other custom reset wiring) and TR+ responds exactly as if you'd pressed the TR menu button, dropping you right back into the menu
- Can be turned off in Settings (
fon page2) when you don't want that, such as when getting into C128 BASIC
- Can be turned off in Settings (
- Programmable Alternate Button — the "Alt" button (to the left of the menu button) is assignable to whatever's most useful when it isn't busy running a freezer cart or REU:
- AutoLaunch (default) — jump straight into your favorite game or utility with one press
- Pause/Unpause — freeze the C64/128 mid-session
- The button LED flashes while frozen so you always know the state
- Or: jump to the TR Menu, Reboot TR, or disable it entirely
- TR+ Expansion Port Test — a full hardware validation suite built for the real cartridge port, only possible because of TR+'s true bus-mastering DMA
- Exercises every expansion port signal individually: address/data bus, DMA, BA, R/*W, IO1/IO2, IRQ, NMI, and all cart control lines (ROMH/ROML/GAME/EXROM)
- Walking Ones and Cascading Ones bus tests, with a looping mode for extended burn-in testing
- Looping this test is the easiest way to check for a known intermittent DMA write issue on some NTSC C128s — see TR+ NTSC C128 DMA Findings for details and the fix
If you're running TR+ on a C64 Ultimate or Ultimate64, we recommend setting Cartridge Preference to External and Bus Operation Mode to Writes in the C64U's settings. This is needed for proper compatibility with TR+'s DMA-based features (Host Extensions, Freezer Cartridge Support, REU, and more) — it's safe to leave these set, so there's no downside even if you're not using those specific capabilities yet. See C64 Ultimate Settings for TeensyROM for the other C64U settings to check, and a file that sets them all.
What does this mean for support of the current TR design? Both designs will live on in parallel and continue to receive future firmware updates. However, some new features will only be available on the TR+ hardware.
Are all the existing TeensyROM features available in the TR+? Absolutely! The new capabilities add to the existing ones, but none are lost.
Can I update my TR to a TR+? Technically yes, but not easily. Updating an existing TR requires multiple trace cuts, pin lifts, wires, and kludged-on components. Contact me directly if you are interested in pursuing this further.